Forklift maintenance methods/steps

Release time:

2023-06-26 17:14

Forklift maintenance maintenance method/process
1, forklift maintenance In order to ensure safety, when lifting the car, the car should be parked on the road and the front and rear tires in the braking situation.
2. After the car support point is placed on the car chassis frame, the bearing point is pressed close to the drive shaft and window frame with hydraulic jacks to lift the car and implement maintenance operations.
3, before the implementation of maintenance operations, it is necessary to remove the wire from the battery to reduce the safety accident caused by power line damage and damage due to the break.
4. Cover the car body, seat and wood floor with a good protective cover to prevent damage and environmental pollution.
5, because the brake oil and car antifreeze is very easy to destroy the spray surface, it is necessary to give appropriate attention when solving.
6, in order to carry out maintenance operations reasonably and stably, the required special tools and common tools must be applied.
7, forklift maintenance parts
8, the applied pins, sealing gaskets, O-rings, sealing rings, clamping rings and locking nuts must be abolished, and new ones must be prepared in advance when remounting. If such parts are reused many times, these parts can not guarantee the conventional role.
9, in order to ensure a proper and successful reassembly operation, the disassembled parts should be neatly classified and stored.
10, forklift maintenance before regular inspection and reassembly, the parts should be cleaned. In addition, the oil hole must be cleaned by air compression to determine that this position is indeed not blocked.
11, before installation, the rotation and rolling surface of the parts must be moistened with automobile oil or lubricating grease.
12, when necessary, sealant should be used on the sealing gasket to prevent leakage.
13, to master all the anchor bolts and hexagonal nuts torque specifications and models.
14, forklift maintenance when the maintenance operation is completed, it is necessary to check whether the maintenance operation is properly carried out.
Forklift maintenance must ensure safety when lifting the car. Please use hydraulic jack or stop. Determine perimeter security. The rope used in lifting the goods should have sufficient safety features. Before disassembling parts with special driving force tools, ensure that anchor bolts, nuts, pipes and electronic wiring harnesses are completely separated.
Forklift maintenance and transport heavy objects, the use of certain facilities or special tools, do not need to move.
When servicing hydraulic transmission systems and other antifouling components, use special cleaning tools and perform in a clean, antifouling area.
Before repairing or welding electrical control system components, ensure that the battery terminal equipment wires are removed. (Remove the negative extremity first, then the positive extremity.)
Be careful to avoid oil, gas and flammable materials into the work area. Sort out the converted parts and special tools.
Place a sign on the engine or control lever of the vehicle during the maintenance of the forklift truck. It is not allowed to disassemble parts during the operation of the automobile engine.
No need to stand under forklift fork or fork rack. During maintenance, block should cover the machine equipment and forklift fork rack.
Maintenance tools are placed in order, maintained regularly, and properly applied.
In a room with poor ventilation (production workshop), the car engine is not suitable for long running.