Before parking the loader for a long time, these details cannot be ignored!

Release time:

2023-06-26 17:16

On the site, sometimes we need to park the load for long periods of time, such as weekends or holidays. However, a long parking time may affect the service life of the loader and cause some problems with the machine. Therefore, before parking the loader, we need to pay attention to the following aspects.
1. Clean the loader
Before parking the loader, the machine needs to be thoroughly cleaned, including the body, engine and the bottom of the machine. This can help prevent dust, dirt and other dirt from becoming fixed on the surface of the machine and causing corrosion and damage. In the cleaning process, it is necessary to use the appropriate detergent and water gun, and ensure that the machine is completely dry before storage.
2. Replace the lubricating oil
Before long parking, it is recommended to change the lubricating oil of the loader. If the lubricating oil is old or polluted, it will lead to the machine not running smoothly, but also reduce the service life of the machine. Therefore, it is recommended to replace the lubricating oil with a new one and change it periodically according to the manufacturer's recommendations.
3. The various operating parts of the machine should be orderly
Shift the variable speed control lever to neutral position; Pull up the button of the parking brake to implement parking brake; The bucket is flat on the ground, and the pilot valve control handle is turned to the middle position; Turn each switch to the middle or "OFF" position and lock all doors.
4. Remove the battery
Long-term parking also requires attention to the use of batteries. If the load is parked for a long time, the battery may lose power, and problems such as corrosion may occur. Therefore, it is recommended to remove the battery before parking and store it in a dry and ventilated place at a moderate temperature.
5. Check regularly
After a long time of parking, we also need to check the loader regularly. For example, you can check the tire pressure every once in a while to prevent a tire leak; Check the condition of lubricants and coolants to ensure they are not spoiled or contaminated; Start the machine once, run the various systems, and grease the moving pins and drive shafts, so that the moving parts can be lubricated, and also charge the battery. To make sure they're in good condition. These tests can help identify potential problems and deal with them in a timely manner.
In short, before parking the loader for a long time, it is necessary to pay attention to cleaning, replacing the lubricating oil, removing the battery and carrying out regular inspections. These steps can help extend the service life of the loader and avoid some problems with the machine. At the same time, before parking, the loader needs to be stored in a dry, ventilated and safe place to ensure that it is in the best storage conditions.